No ACF gallery field data found

Kodera,Beltfeed

C385A

Kodera,Beltfeed

C385A

Belt feed has evolved the Casting.
It doesn’t damage the core wire since stripping is performed with special round blade and cutting of the wire is processed with V-blade all together.
Furthermore, belt feed system has actualized the stable length measurement because it can grasp the face of the cable whose surface is unlevel, which is often seen on cabtire cables or shield wires, etc.
Switching of the belt feeding by air control can be performed at the flip of a switch on the operation panel.

Key information

Shifting of the front end strip unit is possible
Accuracy of processing the wire of stretchy insulation will go up if the front end strip unit is shifted to the position near the front end belt feed.

Technical specifications

MODEL C385A
OUTER DIMENSIONS W716mm ×D430mm ×H266mm
WEIGHT 44kg
POWER SUPPLY AC100V~AC240V(single phase)50Hz/60Hz
POWER CONSUMPTION 35W(Rated)139W(Max)
AIR SUPPLY 0.06Nℓ/min 0.5MPa※1
CUTTING LENGTH 210mm~99,999mm
CUTTING TOLERANCES ±( 0.1+0.0005×L )mm※2 L : indicates a cutting length.
STRIPPING LENGTH FRONT END MAX 1,500mm( Need halh strip )※2
REAR END MAX 210mm( Need halh strip )※2
APPLICABLE WIRES TYPE ABS wire, Air bag wire, 2 core shield wire, VSF, IV, KV, UL,
Teflon , Glass Wire, etc
SIZE AWG#7(10sq)~AWG#28(0.08sq)※2
O.D. Max φ11mm※2
WIRE FEED SPEED Variable
CUTTER MATERIAL Ultra fine particle alloy
DRIVE SUPPLY Stepping pulse motor / Air cylinder

※1. Use clean,dry air.  ※2.Depending on the wire type.

Processing capacity (actual data)

When stripping lenght is long.

Number of processed wires per hour

Total length Pieces
 700mm 891 Processing conditions:

  • Both end stripping: 100 mm
  • Half-strip length: 50mm
  • Setting of speed: 9
  • Close time: 0,1sec
  • Open time: 0,1sec

 

1000mm 769
1500mm 628
2000mm 530
2500mm 458
3000mm 405
5000mm 327

Processing capacity (actual data)

When stripping lenght is short.

Number of processed wires per hour

Total length Pieces
 500mm 2,022 Processing conditions:

  • Both end stripping: 60 mm
  • Half-strip length: 30mm
  • Setting of speed: 9
  • Close time: 0.1sec
  • Open time: 0.1sec

 

1000mm 1,263
1500mm 918
2000mm 726
2500mm 598
3000mm 507

SAMPLE

PDF for download

no files for download

Technické špecifikácie

MODEL C385A
OUTER DIMENSIONS W716mm ×D430mm ×H266mm
WEIGHT 44kg
POWER SUPPLY AC100V~AC240V(single phase)50Hz/60Hz
POWER CONSUMPTION 35W(Rated)139W(Max)
AIR SUPPLY 0.06Nℓ/min 0.5MPa※1
CUTTING LENGTH 210mm~99,999mm
CUTTING TOLERANCES ±( 0.1+0.0005×L )mm※2 L : indicates a cutting length.
STRIPPING LENGTH FRONT END MAX 1,500mm( Need halh strip )※2
REAR END MAX 210mm( Need halh strip )※2
APPLICABLE WIRES TYPE ABS wire, Air bag wire, 2 core shield wire, VSF, IV, KV, UL,
Teflon , Glass Wire, etc
SIZE AWG#7(10sq)~AWG#28(0.08sq)※2
O.D. Max φ11mm※2
WIRE FEED SPEED Variable
CUTTER MATERIAL Ultra fine particle alloy
DRIVE SUPPLY Stepping pulse motor / Air cylinder

※1. Use clean,dry air.  ※2.Depending on the wire type.

Processing capacity (actual data)

When stripping lenght is long.

Number of processed wires per hour

Total length Pieces
 700mm 891 Processing conditions:

  • Both end stripping: 100 mm
  • Half-strip length: 50mm
  • Setting of speed: 9
  • Close time: 0,1sec
  • Open time: 0,1sec

 

1000mm 769
1500mm 628
2000mm 530
2500mm 458
3000mm 405
5000mm 327

Processing capacity (actual data)

When stripping lenght is short.

Number of processed wires per hour

Total length Pieces
 500mm 2,022 Processing conditions:

  • Both end stripping: 60 mm
  • Half-strip length: 30mm
  • Setting of speed: 9
  • Close time: 0.1sec
  • Open time: 0.1sec

 

1000mm 1,263
1500mm 918
2000mm 726
2500mm 598
3000mm 507

SAMPLE

no files for download

Dlhší nadpis o produkte a galérii

Ultrices fames dapibus amet volutpat. Viverra netus vulputate adipiscing proin sollicitudin. Pellentesque facilisis libero eu, vulputate sit porttitor tellus nisi. 

I am interested in a similar solution

We will be happy to prepare a non-binding price offer and a proposal for a technical solution exactly according to your requirements.

    Are you interested in our services? Contact us.

    We specialize in the design and manufacture of wires and wiring harnesses for manufacturers of appliances, lighting, compressors, telecommunications technology and other industries.

    PMB Slovakia, s.r.o.

    Novonosická 503 / 5
    020 01 Púchov Slovak republic

    Tel.: +421 911 216 942
    E-mail: sales@pmb.eu

    © 2021 PMB Slovakia